We’re Stumped!

We’re back with yet another Halloween decorating idea.  We’ve already shared a DIY feather wreath and a spooky tree, but why not add a stump side table to an outdoor setting?  We did.  We have a huge woodpile in our backyard.  Usually it helps keep us warm throughout the winter months, but I decided to make it work a little harder.  I picked out a relatively level stump and rolled it to our front walkway and parked it next to our chairs.  I didn’t do anything else to it. 

Then, to Halloween it up a little, I topped it with a vase of pretty flowers, a paper mache skull from Michael’s that I spray painted white, a faux pumpkin from Hobby Lobby (also painted white) and a real baby pumpkin.

 Stump decoration breakdown:

Stump:  FREE

Paper mache skull:  $1.49

Faux pumpkin:  $1.49

White spray paint:  Left over from our DIY dining table

Baby Pumpkin: FREE from a friend

Total for stump and decorations:  $2.98

See the striped pillow?  I made that.  I had a few yards of white corduroy fabric left over from an earlier project, so I decided to use that rather than buy more fabric.  First, I sewed the cover, (here’s a tutorial) turning the fabric inside out.  I wanted the smooth part facing out so it would be easier to paint.  Once I had my cover, I taped off 2 1/2 inch wide stripes.

After that, it was easy.  Use black fabric paint and fill in between the lines.  Remove the tape soon after and stuff with a pillow form when completely dry. 

Pillow budget breakdown:

Fabric:  Left over from another project

Fabric paint:  Also left over from a previous project

Two pillow forms: $8.99 at JoAnn Fabric

Total cost for Halloween Pillows:  $8.99

To add more spookyness on the cheap, I picked up a plastic skeleton from Dollar Tree.

 I didn’t like the color, so covered that baby in white spray paint, too. 

Then, my skeleton fell into the freshly cut grass.  I let him dry and pulled off as much as I could and hit him with another coat of white.  He survived – he’s already dead.  Hang with fishing line and you’re done. 

One thing I loved about the Pottery Barn inspiration image were the candles.  Well, I wasn’t about to spend $30.00 or more on candles, so I looked around the house for suitable substitutes.  I had a few vintage oil lamps, so I added those to the mix.  Toss in a grapevine pumpkin and we’re done!

Miscellaneous decoration cost:

Skeleton: $1.00

White spray paint:  Left over

Oil lamps:  FREE (The black one was hanging on our fence when we bought the house and the red was a thrift store find a few years ago.  I think it was $1.50 or so.)

Grapevine pumpkin:  $2.50 at Target (but can multi-purpose for Thanksgiving, too!)

Miscellaneous Total:  $3.50

Which brings our Halloween decoration grand total to…$20.45!  And here’s how it all looks together.

Of course, we still need real pumpkins, but we’re not quite ready yet.

Eerie Tree

Last week, I shared a simple DIY Halloween wreath tutorial and now I’m back with another cheap spooky Halloween project, again, inspired by this Pottery Barn image.

I  love the look of the glitter potted trees.  I am aware that this version is some sort of foam, but I didn’t want to spend a ton of money for something like this.  Instead, I used a dead branch from our birch tree. 

Using a can of black gloss spray paint, I covered all areas of the branch and let everything dry.  Then, I applied a second coat to make sure the color was truly black.  Super simple. 

After the second coat dried, I placed my eerie tree in a planter I had left over. 

To cover the dirt, I spread the remaining nuts from our fall decoration around the base of the tree and threw in a few pine cones.  A little crow from Dollar Tree adds another touch of spook. 

Eerie tree budget breakdown:

Branch: FREE

Black spray paint: $1.00 at Wal-Mart

Planter: Already owned

Nuts and pinecones: FREE from mother nature

Crow: $1.00

Total Cost:  $2.00

So far, our Halloween decorations have cost $4.98, wa hoo!  We’ll cover a few more frugal decorating ideas tomorrow, so come back for more.

Here’s a tip:  If you plan to use real nuts, plan for the squirrels to eat them.  We went out-of-town for the weekend and returned to find all the nuts missing.  I’m sure the squirrels loved it. I pictured a little assembly line of squirrels passing nuts down the line until they were gone and now they’re having a feast.  Yeah, you may want to use bark, mulch or fake Spanish moss.

Let the {Halloween} Festivities Begin

I know, I’m a little late, but better late than never, right?  Usually, I don’t do a lot (if any) Halloween decorating, but Vincent is three this year and he’s pretty excited about pumpkins and Halloween in general.  I was inspired by this Pottery Barn image. 

Almost anything Pottery Barn is beautiful, but I really liked the color palette, tons of pumpkins and the wreath.  I saw a similar black feather wreath at Michael’s for $14.99, but I didn’t want to spend that much on a once a year item.  Instead, I went to Dollar Tree and picked up a simple wreath form.  Then, I took a trip to Hobby Lobby and picked up two different types of black feathers; one package of large (about 6 inches or so) feathers and another of smaller, filler feathers. 

Once I returned home, I spray painted all sides black using paint I had on hand.  After the paint dried, I tied a loop of fishing line around the wreath form.  Our front door has trim that prohibits the use of a traditional wreath hook, so I have to hang wreaths using ribbon or string.  After attaching the fishing line, I used my handy-dandy hot glue gun to attach the feathers. 

I started by placing  a few of the filler feathers in to cover the wreath form.  Then, I cut the larger feathers into the shape I wanted.

Do you see the difference?  I shaped the feather on the left by cutting the top into a nice, rounded shape.  Then, I glued my cut feathers over the filler feathers, being sure to cover any of the wreath form.  I didn’t bother to cover the very back, because that will be against the door, but I did cover the remaining sides.  I did this all the way around, placing the feathers in the same direction until I got to the beginning.  Then, I made sure to tuck the feather ends under the first row. 

I tapped a small pin into the top center of our door and looped the fishing line around and we were in business.

Here’s what my Halloween wreath cost:

Wreath Form: $1.00

Black spray paint:  Leftover from another project, but you can get black paint for $1.00 from Wal Mart

Black feathers: $1.98 (with plenty to spare)

Fishing line: Already had on hand

Glue gun and sticks: Already had

Grand Total:  $2.98

Granted, my version isn’t as large as the Pottery Barn version, but I think it adds the same touch.  Although, I won’t be painting our door orange any time soon.  Keep an eye out for more Halloween decorating ideas soon!