DIY Decor & Crafts

Sealed With a Kiss

Published on February 11, 2014February 10, 2014 by Our Humble Abode2 Comments

V is so excited for his class Valentine’s day party. We’re packaging up pencils, Hershey Kisses, and Tootsie Rolls for each classmate. And each bag is ‘sealed’ with a kiss.

He has been talking about seals for the past month or so, so it seemed perfect for this little punny sticker. If you like it, you can print your own set.

I printed mine on a full sticker sheet, then used a paper cutter to separate each. I left the personalized notes out for these photos, but here’s the matching card.

Happy early Valentine’s day! Do you have any special plans?

Broken Hearted

Published on February 5, 2014February 5, 2014 by Our Humble Abode1 Comment

As we’re all aware, Valentine’s day is just over a week away. While I love the opportunity to show a little extra love to my special men, I’m not so into red and hearts. Instead, Ev and I partnered up to make a two toned heart pillow. He chose the paint colors and I did the rest.

Using scrap paper, I made a half heart template and lightly traced it on my fabric with a pencil. Using a yard stick, I made a line across to separate the triangular base from the top.

Martha Stewart craft paints claim to be good on fabric, so that’s what I used to fill in. If I weren’t stuck inside due to crazy cold, snowy weather, I would have used fabric.

I’d rather have a lovey design with year round colors, so Ev did a good job with his choices. Dude knows how to pick ’em.

Here are two more fun heart pillows you could make to add some love to your house:

DIY geometric heart pillow:

Gold pleather heart pillow: Yay for more modern versions of an old favorite.

Where do you stand on Valentine’s day and the decor that usually goes with it?

Quick Paints

Published on January 27, 2014January 27, 2014 by Our Humble Abode3 Comments

Between finishing up the bathroom remodel and plotting our next project, I haven’t had much energy for little projects. So what I have made recently is quick and no frills. I’m talking about you, plant stand and copper vase. My two most recent home additions aren’t any more difficult. Quite opposite, actually requiring only paint and a gold paint pen. Last summer, we found several cheapo plastic planters in the attic. I wrapped one for my cabbage plant.

Around Christmas, I bought a little Norfolk Pine from Home Depot. I’m happy to report it’s still going strong and needed a larger pot. So I cut off the rolled rim, spray painted it flat white, and made a loose herringbone pattern with a gold oil Sharpie.

With dreary winter, I’m so happy to have live green plants in the house. This one lives at the top of the stairs.

Right next to my newly thrifted chrome and black vinyl sling chair. I wasn’t going to get it, but it was only $7 and 25% off. The entry closet is only a few steps away, so this is a natural place to sit to put on or take off shoes. And the lightweight frame and slim size is perfect for the area.

Ben has enough black or cream leather to give this a makeover. Cream looks to light, and the black won’t look different. Perhaps black woven strips? What would you do? The vinyl is in great shape, so it doesn’t need anything…

Ignore the baseboard-less, patchy walls, and unfinished toe kick. That will happen, eventually.

While cooped up in the house, the boys and I have painted. Our entry is unfinished and boring, remember this? After discussing hooks, we decided they’d just add clutter to this small entry. But a painting is simple:

Something to fill some wall space, but it’s an awkward wall to work with.

The stairs angle up, making a small sliver at the top. In the not too distant future, the entry will probably get a makeover (new front door, tile, wall treatment, and new paint).

Another case of, “I’ll live with it until we get around to a full makeover.”

Plumbing Aisle Inspiration

Published on January 22, 2014January 22, 2014 by Our Humble Abode8 Comments

While getting copper supplies for the bud vase, I wanted to make something with basic hardware store supplies.

What do you get when you pair 8 feet of 5/8 inch wooden dowel, 6 1/2 inch copper T connectors, 1 90 copper elbow, a two gallon bucket, glue, and spray paint?

A cute (in my opinion, anyway) planter and stand.

That aloe plant is my oldest plant. I’ve had it for three or four years (the only plant I’ve kept alive over a year) now and it desperately needed a larger pot. It was looking like a male orca in captivity; confined and droopy. While priming the bathroom drawers with Kilz primer, I noticed the small 2 gallon bucket would be the perfect size. Which spurred, the hardware store plant stand. If you want to know how I made my, read on.

Here’s my cut list:

Two at 1 5/8 inch long, for the base.

Four dowels cut at 2 3/4 inches, also base pieces.

Four at 3 inches, top pieces to hold the bucket in place.

and four more at 10 inches for legs, all cut with a chop saw.

I started with two 4 foot lengths of 5/8 inch dowel and 1/2 inch copper fittings. The two short pieces (1 5/8) fit inside each side of the elbow. Attach a T to each end like this:

The four 2 3/4 inch sticks go in each hole of the T connectors to make the base.

Add the four remaining Ts to the ends for the leg attachments.

After dry fitting everything, I rolled each dowel end in Liquid Nails to secure the pieces.

And let if dry on a flat surface, with the three-inch pieces down.

While the glue dried, I asked Ben to cut the top off the bucket. I didn’t want the handle or ridges. This bucket was thin enough he was able to cut through with a sharp utility knife. To make the bucket look, well, less bucket-y, I gave it two coats of flat white spray paint.

Now, sir Aloe has a larger pot with room to grow. And I really like the mix of shiny copper and wood.

A new Philodendron is keeping it company by our back patio door.

This could easily be modified by staining or painting the wooden legs, or making it entirely from copper. Buy copper tubing and 8 copper caps for the legs and you’ve got a shiny, custom stand. All from humble plumbing parts and hardware store basics.

The Copper Tone

Published on January 16, 2014January 16, 2014 by Our Humble Abode5 Comments

Some of my creations are a way to use left over materials. Whether fabric scraps, left over wood veneer, or in this case, wood ends.

Ben kept these scraps from the Bubinga counters, but had no use. While cleaning out the garage last weekend, he brought them upstairs and set them in our wood pile. Knowing I could make something, I saved them from a firey death. Of course Ben accused me of hoarding, but it’s worth it. After seeing these beautiful jewelry blocks, I knew what I wanted to do. I cut a 1 3/4 inch cube (because my pieces were already 1 3/4 inches, which also happened to be the width of the tube strap) and bought a 1/2 inch copper air chamber and copper tube straps, both found in the plumbing aisle. Add a few screws, a tooth hanger, and we’ve got a chic, industrial, wall mounted bud vase.

If you want to make your own, start with a wooden cube, dealer’s choice. Because the Bubinga is super dense, I used a small drill bit to make pilot holes for the screws. Both front (for the strap) and back (for the hanger).

Short screws hold each in place. I couldn’t find copper screws, so I used brass instead. I might get a copper leaf pen to paint the heads.

A small nail hangs the vase on the wall, but I didn’t like the slight lean it gave the piece. A few sticky back felt dots bumped up the bottom to hang parallel to the wall.

If I han’t already hung the astrological cut outs about the toilet, I’d want three or five of these instead. Loving how the copper popped against the dark bathroom walls, I hung it in the little space between the shower and bathroom door.

A cheap, colorful carnation brightens this dreary winter.

Now I have an excuse to keep fresh flowers in the house. Sometimes, small projects like these are my favorites. Simple, affordable, and brighten a room. What do you think of this DIY vase?